FIRE
DETECTION
LINEAR HEAT DETECTION CABLE
CDL CABLE

CDL CABLE

DISTANCE LOCATOR

DISTANCE LOCATOR

 


CDL thermal cable is a detection system that, connected to a fire control panel, can detect a temperature rise at any point throughout its length. It consists of two twisted wires covered by a heat-sensitive polymer that, when the designated temperature is reached, breaks apart allowing the two wires to touch and give off an alarm signal.
 

It can be connected to any type of conventional or analog control panel, using a conventional module.
 
The CDL thermal cable can be connected to the DL distance locator to identify the exact point of alarm throughout the total length of the cable, up to 3,000 meters.

 
There are 5 different types of CDL thermal cable available depending on the alarm temperature selected: 68°C, 78°C, 88°C, 105°C and 235°C.
 

The first four types can have different external covers depending on the application:
 

– Standard: For any type of installation. Protected against UV rays, meaning it can be installed outdoors.
 
– Polypropylene: especially designed for installations where corrosive chemical substances are present.
 
– Nylon: covered in Nylon, has especially been designed for installations where there is a risk of mechanical damage.
 
235°C cable is only available with Silicone Rubber outer coating.
 
In addition, we have guide wire and the possibility of adding the guide wire to the cable at production.
 
UL and FM certified.
 



GAS DETECTION
ENVIRONMENTAL CONTROL AND TUNNELS
Public Adress

Leave a Reply